AirSense 10 AutoSet CPAP Machine with HumidAir
WOULD YOU LIKE TO ADD A MASK FOR $0 TODAY?
- Tube-on-top and minimal design lets you sleep in any position.
- SpringFit frame adapts to give you a personalized, secure fit.
- Under-the-nose cushion and tube on top lets you sleep how you want.
- SprintFit frame adapts to give you a personalized, secure fit.
- Minimal design leaves you a clear view.
- Under-the-nose full face cushion reduces red marks and irritation.
Frequently Bought Together
Customers Who Viewed This Also Viewed...
Product Features:
- ResMed's first Smart CPAP
- Whisper Quiet
- AirView
- Expiratory Relief Pressure
- AutoSet Response
- Meets FAA requirements
- Compatible with International Power Sources
ResMed's First "Smart" CPAP
The all-new CPAP machine from ResMed is also the first "Smart" CPAP. Its advanced features give you the ability to monitor and manage your CPAP therapy with ease. The built in cellular modem makes it easy to get sleep reports and to have your settings adjusted. The Airsense 10 is also the first CPAP system to incorporate wireless cloud computing, it is the first CPAP machine that offers personalized and customizable support, and it is the first system with advanced sleep onset detection.
Whisper Quiet
The quiet Easy-Breathe motor makes for a peaceful environment for you and your bed partner.
AirView
Using AirView™, you can access nightly therapy data. Easy Breathe or your doctor can troubleshoot remotely and change device settings remotely.
Expiratory Relief Pressure
Expiratory pressure relief (EPR) maintains the optimal treatment pressure during inhalation and reduces pressure during exhalation, increasing comfort.
AutoSet Response
AutoSet Response comfort setting offers gentler pressure increases and a smoother night’s sleep. Built-in ambient light sensor adjusts brightness of the screen based on the light in the room and turns off automatically.
Meets FAA Requirements
The AirSense™ 10 and AirCurve™ 10 devices meet Federal Aviation Administration (FAA) requirements for all phases of air travel, so you can safely take your device on board as carry-on luggage.
Compatible with International Power Sources
The AirSense™ 10 and AirCurve™ 10 devices are compatible with all international power sources. All you need is a set of plug adapters and you can use your device anywhere that has a power outlet.
What's in the Box?
- Auto-Adjusting CPAP Machine
- Integrated HumidAire Heated Humidifier
- Standard Humidifier Chamber
- Flow Generator Tubing
- Power Supply and Cord
- Travel Bag
- 1 Standard Filter (Uninstalled)
- Filter Cover
- Patient Manual
Product Specifications:
Weight - Machine with Water Chamber: 2.75 lbs (44 oz.)
Dimensions - Machine with Water Chamber: 10.04 in L x 4.57 in W x 5.91 in H
Weight - Standard Chamber: .54 lb
Weight - Machine with Side Cover (Without Water Chamber): Approx. 2.452 lbs
Dimensions - Machine with Side Cover (Without Water Chamber): Approx. 8 in L x 4.57 in W x 5.91 in H
Dimensions - Travel Bag: 13.24 in L x 10 in W x 5 in
Weight - Travel Bag Alone: 1.18 lb
Weight - Machine with Humidifier; Power Supply and Cord; ClimateLineAir Tubing; Travel Bag: Approximately 5.25 lbs
Water Chamber Capacity: 380 mL
Weight - 90W Power Supply, Cord and Plug: 1.29 lb
Dimensions - 90W Power Supply Only (Not including Cord or Plug): 5 1/2 in x 1 7/8 in x 1 1/4 in
AC Input Range - 90W Power Supply: 100 - 240V, 50 - 60Hz, 1.0 - 1.5A, Class II
DC Output - 90 W Power Supply: 24V --- 3.75A
Typical Power Consumption: 53W (57VA)
Peak Power Consumption: 104W (108VA)
Operating Pressure: 4 - 20 cm H2O
Length - Flow Generator Tubing: 6 feet
Materials - Flow Generator Tubing: Flexible Plastic
Materials - Water Chamber: Injection Molded Plastic, Stainless Steel, Silicone Seal
Materials - Standard Filter: Polyester non-woven fiber
Operating Temperature: 41° F - 95° F (5° C - 35° C)
Storage and Transport Temperature: -4° F - 140° F (-20° C - 60° C)
Operating Humidity: 10% - 95% Relative Humidity, non-condensing
Storage and Transport Humidity: 5% - 95% relative Humidity, non-condensing
Operating Altitude: Sea Level - 8500 Feet (2,591 M); Air pressure range 1013 hPa - 738 hPa
Maximum Temperature - Heating Plate: 154° F (68° C)
Maximum Temperature - Cut Out: 165° F (74° C)
Maximum Gas Temperature: Less than or Equal to 106° F (41° C)
IEC 60601-1:2005 Classification: Class II (Double Insulation), Type BF, Ingress protection IP22
Machine Warranty: 2 Years
Patient Weight: Greater than 66 lbs
Cleaning Instructions
For a hassle-free cleaning experience, the SoClean 2 CPAP Cleaner and Sanitizer is a fantastic solution to efectively killing 99.9% of germs and bacteria on your water chamber, mask, and tubing. Click here to find out more information about the SoClean!
Alternatively, you can clean by hand, but this will not guarantee removal of germs and bacteria. The chamber should be taken apart and hand washed weekly using warm water and a mild detergent. It should be rinsed well and allowed to air dry out of direct sunlight. The chamber should not be washed in a dishwasher or washing machine. The hose should be washed in the same manner and allowed to completely dry out of direct sunlight. The exterior of the machine should be wiped down with a dry cloth.
Travel Instructions
If you are traveling outside of the USA, this device will be compatible in other countries with the use of the CPAP Travel Adapter.Going camping? The Medistrom Pilot-24 Lite Battery will bring CPAP therapy to the outdoors! This battery can provide 1-2 nights of power with the humidifier and heated hose turned off.
When using your device on an airplane, make sure the water tub is completely empty and inserted into your device. Do not use your device with water in the tub during air travel to avoid the risk of water inhalation and spillage during turbulence. Ensure humidification is turned off. Ensure Airplane Mode is enabled.