Contact Us
AirSense 10 Elite w/ HumidAir and ClimateLineAir Tube
WOULD YOU LIKE TO ADD A MASK FOR $0 TODAY?
- Tube-on-top and minimal design lets you sleep in any position.
- SpringFit frame adapts to give you a personalized, secure fit.
- Under-the-nose cushion and tube on top lets you sleep how you want.
- SprintFit frame adapts to give you a personalized, secure fit.
- Minimal design leaves you a clear view.
- Under-the-nose full face cushion reduces red marks and irritation.
Frequently Bought Together
Customers Who Viewed This Also Viewed...
Features:
The AirSense™ 10 Elite is a basic fixed-pressure CPAP machine that is designed to make therapy easy. It features an integrated humidifier and can be used with the ClimateLineAir™ heated tube for the optimal temperature and humidity delivered to your mask.
With no complicated settings or menus to navigate, simply press Start and you’re ready to go. It comes with built-in humidification and can be used with the ClimateLineAir™ heated tube for optimal temperature and humidity delivered to your mask. It also provides advanced clinical insights about your therapy to your doctor.
• The user-friendly controls, intuitive interface and color LCD screen make it simple to navigate
menus and customize comfort settings.
• The AutoRamp™ feature delivers lower pressure until you fall asleep and then ramps up to your
prescribed level.
• The quiet Easy-Breathe motor makes for a peaceful environment for you and your bed partner.
• The SmartStart™ function allows you to begin therapy as soon as you breathe into your mask.
When you remove your mask, it stops automatically after a few seconds.
• Advanced event detection provides valuable clinical insights for your doctor.
Items included:
Elite CPAP Machine
Integrated HumidAir Heated Humidifier
Standard Humidifier Chamber
ClimateLineAir Tubing
Power Supply and Cord
Travel Bag
1- Standard Filter (Uninstalled)
Filter Cover
Patient Manual
Product Specifications:
Weight - Machine with Water Chamber: 2.75 lbs (44 oz.)
Dimensions - Machine with Water Chamber: 10.04 in L x 4.57 in W x 5.91 in H
Weight - Standard Chamber: .54 lb
Weight - Machine with Side Cover (Without Water Chamber): Approx. 2.452 lbs
Dimensions - Machine with Side Cover (Without Water Chamber): Approx. 8 in L x 4.57 in W x 5.91 in H
Dimensions - Travel Bag: 13.24 in L x 10 in W x 5 in
Weight - Travel Bag Alone: 1.18 lb
Weight - Machine with Humidifier; Power Supply and Cord; ClimateLineAir Tubing; Travel Bag: Approximately 5.25 lbs
Water Chamber Capacity: 380 mL
Weight - 90W Power Supply, Cord and Plug: 1.29 lb
Dimensions - 90W Power Supply Only (Not including Cord or Plug): 5 1/2 in x 1 7/8 in x 1 1/4 in
AC Input Range - 90W Power Supply: 100 - 240V, 50 - 60Hz, 1.0 - 1.5A, Class II
DC Output - 90 W Power Supply: 24V --- 3.75A
Typical Power Consumption: 53W (57VA)
Peak Power Consumption: 104W (108VA)
Operating Pressure: 4 - 20 cm H2O
Length - ClimateLineAir Tubing: 6 feet
Materials - ClimateLineAir Tubing: Flexible Plastic
Materials - Water Chamber: Injection Molded Plastic, Stainless Steel, Silicone Seal
Materials - Standard Filter: Polyester non-woven fiber
Operating Temperature: 41° F - 95° F (5° C - 35° C)
Storage and Transport Temperature: -4° F - 140° F (-20° C - 60° C)
Operating Humidity: 10% - 95% Relative Humidity, non-condensing
Storage and Transport Humidity: 5% - 95% relative Humidity, non-condensing
Operating Altitude: Sea Level - 8500 Feet (2,591 M); Air pressure range 1013 hPa - 738 hPa
Maximum Temperature - Heating Plate: 154° F (68° C)
Maximum Temperature - Cut Out: 165° F (74° C)
Maximum Gas Temperature: Less than or Equal to 106° F (? 41° C)
IEC 60601-1:2005 Classification: Class II (Double Insulation), Type BF, Ingress protection IP22
Machine Warranty: 2 Years
Patient Weight: Greater than 66 lbs
Cleaning Instructions: The chamber should be taken apart and hand washed weekly using warm water and a mild detergent. It should be rinsed well and allowed to air dry out of direct sunlight before reassembling. The chamber should not be washed in a dishwasher or washing machine. The SlimLine hose should be washed in the same manner and allowed to completely dry out of direct sunlight before reattaching to the machine and mask.
Recently Viewed
