SleepWeaver Advance Mask with Headgear
WOULD YOU LIKE TO ADD A MASK FOR $0 TODAY?
- Tube-on-top and minimal design lets you sleep in any position.
- SpringFit frame adapts to give you a personalized, secure fit.
- Under-the-nose cushion and tube on top lets you sleep how you want.
- SprintFit frame adapts to give you a personalized, secure fit.
- Minimal design leaves you a clear view.
- Under-the-nose full face cushion reduces red marks and irritation.
Frequently Bought Together
Customers Who Viewed This Also Viewed...
Product Features:
- Allergy Free
- Noise Reduction
- Gentle Headgear
- Secure Seal
- Machine Washable
Allergy Free
The soft, breathable, cloth SleepWeaver Advance will leave you hardly aware that you're wearing any CPAP device at all. With NO SILICONE OR LATEX, your nostrils will be free, your forehead won't be dented, and you'll be wrinkle-free in the morning.
Noise Reduction
The SleepWeaver Advance features a series of holes on the front of the mask for exhalation. The design means that breath escapes through a wider area, minimizing noise and preventing the concentrated stream of air that often leads to whistling and whooshing noises in other masks. Fabric also naturally absorbs sound, unlike the plastic traditionally used.
Gentle Headgear
The design of this mask means that the seal is formed by the pressure from your CPAP system, rather than by the tightness of the headgear straps. This generally allows for a looser headgear fit without compromising the seal, reducing pressure sores on the bridge of the nose, forehead, and other parts of the face.
Secure Seal
The SleepWeaver is made of soft cloth and has no rigid parts that come into contact with the skin. It inflates to form a balloon of air that pushes gently against the patient's face to form a seal. Because the cloth is flexible and follows the exact shape of each individual's face, air leakage is reduced.
Machine Washable
The SleepWeaver Advance mask and headgear can be washed in a washing machine with your regular laundry using your usual detergent. Use a gentle cycle with cold or warm water. Never use hot water, as this will cause the mask to shrink and disfigure. Once washed, hang the mask to dry. Never tumbledry it, as this will also cause it to shrink and disfigure. The SleepWeaver can also be hand washed with a mild, non-abrasive hand soap.
What’s in the Box?
- SleepWeaver Advance Mask without Headgear
- SleepWeaver Advance Headgear
Product Specifications:
Manufacturer: Circadiance
Mask Release Year: 2016
Quick-Release Headgear: No
Quick-Release Swivel: No
Magnets: No
Materials:
Cloth Cushion: Polyester, Nylon, Elastane
Headgear: Polyurethane Foam, Nylon, Lycra
Mask Elbow: Polycarbonate
Quick Fit Tips
1. Remove your SleepWeaver Advance Mask from the packaging.
2. Connect the tubing from your CPAP or BiPAP machine to the Swivel Connector on the front of the mask.
3. Turn on your CPAP or BiPAP machine.
4. When the mask inflates, hold the headgear with both hands, position the mask on your nose, and pull the headgear over your head. Make sure that the cup of the mask is centered over your nose, and align the head strap to the center of your head.
5. Pull the headgear over the back of your head until the neck strap is snug just below your ears.
6. If you experience leaks, adjust the mask as described below.
7. Lie down in your normal sleeping position. If any leaks occur, readjust the mask.
Adjusting for Leaks
1. With your CPAP or BiPAP machine on, pinch the portion of the mask directly over your nose, pull the mask slightly away from your face, towards your feet, and gently release
2. If you experience leaks from the sides of the mask, adjust the neck straps by unhooking the tab from the strap and pulling the straps out to tighten the mask, then re-latching the tab to the strap
3. If you experience leaks into your eyes, adjust the head strap.
4. At times it is possible to stop leaks and get a better fit by loosening the mask just a bit, then repeating Step 1 above.
SleepWeaver Universal Mask Sizing Guide.pdf (472.4 KB)
Sleep_Weaver_Advance_FAQs.pdf (1.2 MB)