The Philips-Respironics "System One" REMstar Pro with C-Flex+ takes a smarter approach to the entire sleep management process. New features such as resistance control, advanced event detection, upgraded data management and reporting, and C-Flex+ put this CPAP machine on the cutting edge.

C-Flex+ is Respironics' newest enhancement to comfort when in fixed CPAP mode. Like C-Flex, C-Flex+ provides flow-based pressure relief at the beginning of exhalation. Like A-Flex, C-Flex+ softens the pressure transition from inhalation to exhalation to provide additional comfort in fixed-CPAP mode. The System One resistance control allows the patient to tell the machine what type of mask you are using such as a nasal, full face, or nasal pillow. The machine then makes adjustments for optimal flow depending on your mask. Each Respironics mask will now come with a resistance control setting letting you know how to set your machine to match your mask.

Philips-Respironics has upgraded their event detection algorithm to include data on Snoring, Periodic Breathing (PB), Respiratory Effort-Related Arousals (RERAs), Apnea Hypopnea Index (AHI), leak, Clear Airway Apnea (CA), Obstructed Airway Apnea (OA), and Hypopnea (HY). The REMstar Pro will also record Patterns of use and Flow waveform data. With this information, your physician will be able to better determine the best possible solutions for your sleep therapy. The PR System One uses a SD card for data collection. Prior to the System One, patients were required to use a specialized card reader when uploading sleep data to a computer. Philips-Respironics has made this process easier by using the standard SD card, giving the patient the ability to use any SD reader to upload sleep data.

Product Specifications

Pressure Range 4-20 cm H20 (.5 increments)
Ramp Time 0 to 45 min. (5-min. increments)
Starting Ramp Pressure 4 to CPAP; user adjustable
Dimensions 7" L x 5.5" W x 4" H 18 cm L x 14 cm W x 10 cm H
Weight 3 lbs / 1.36kg
Dimensions of 60 Watt Power Supply (For Use Without Heated Tube) - Not Including Cord or Plug:
4.75 in x 2.75 in x 1.75 in
Dimensions of 80 Watt Power Supply (For Use With Heated Tube) - Not Including Cord or Plug:
6 in x 2.75 in x 1.75 in
Altitude Compensation: Manual - Maximum height 7500 feet.
Filters Pollen and optional ultra-fine
Device Set-Up LCD/Control Wheel or Encore Software
Data Storage Capacity
Display: Compliance VIC. 7-Day and 30-Day averages
SD Card >1 Year Compliance Data
On-board: up to 6 months
Compliance Meter Breathing detection
Electrical Requirements 100 - 240 VAC, 50/60 Hz (An adapter may be needed to plug the CPAP into a wall outlet outside the US.) 12volt DC
Max Exposure Heat for Machine Machine should not be exposed to heat greater than 140 degrees Fahrenheit